Chemical industry

Application examples in the chemical industry

Application examples of the PowerMaster, TubeMaster and JetMaster systems from mycon GmbH in the chemical industry.

These pictures show the cleaning of spiral finned heat exchangers before and after cleaning.

Application examples for the use of the PowerMaster, TubeMaster and JetMaster systems from mycon GmbH in the chemical industry. Here during the cleaning of finned tube heat exchangers before / after.

Examples of the automated JetMaster system – cleaning heat exchangers

Examples of the automated JetMaster system – cleaning heat exchangers

Example of the JetMaster system – cleaning heat exchangers

Examples of the automated JetMaster system – cleaning heavily soiled finned tubes

Application examples

Comparison Image 1
Comparison Image 2

Mixing container before and after manual cleaning

Comparison Image 1
Comparison Image 2

Plate heat exchanger before and after cleaning

Comparison Image 1
Comparison Image 2

Graphite tube before and after cleaning

Comparison Image 1
Comparison Image 2

Plate heat exchanger before and after cleaning

Cleaning a heat exchanger (graphite tubes) using TubeMaster

Cleaning of glue layers with PowerMaster

Front view of the graphite heat exchanger before cleaning

Heat exchanger made from graphite tubes using TubeMaster

Cleaning a waste gas incineration plant in PVC production

Cleaning an agitator cutter

Polishing the inner tube surfaces with special granulate using TubeMaster

Tube heat exchanger after cleaning with TubeMaster

Cleaning plate heat exchangers

Cleaning cooling towers

The pipes in the cooling tower were occasionally fed with calcareous water. As a result, an armor of hard limestone had developed around the pipes.The JetMaster combination system successfully cleaned the outer surfaces of the pipes. Zinc coating – which was destroyed here by previous chemical cleaning – is not attacked by JetMaster.

Exterior view of a cooling tower with removed limescale deposits

Limescale removed during cooling tower cleaning with the JetMaster combination system

Cooling tower pipes after cleaning

The entire JetMaster combination system (incl. JetPower) is used for cleaning surfaces with limescale residues. Further information on the JetMaster combination system can be found on our JetMaster product page.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.