Kipp Umwelttechnik GmbH also uses the JetMaster from mycon GmbH in the field of energy generation. JetMaster is environmentally friendly and saves resources. The water consumption is extremely low at 0.20 – 1.00 l clear water per minute of use. JetMaster works without the addition of chemicals. In contrast to other aqueous cleaning processes, this also greatly reduces the amount of wastewater, which is only contaminated by the mostly harmless soiling of the surfaces in this area. An investigation of the air-cooled condenser in a customer’s system revealed some surprising findings: The performance of the air-cooled condenser examined fell to up to 57% of the rated output between 2 cleanings at intervals of 5 months due to soiling. This leads to a drop in energy production of up to 25%. If, on the other hand, the LuKo is cleaned on demand, its output does not fall below 95%, which means that the slumps in production can be largely avoided.
Power generation
Difficulties with the constant functionality of your Luko in the warmer months? JetMaster AS from mycon GmbH offers the solution. We will be happy to calculate the options for improving functionality for you in advance.
![Energieerzeugung-individual](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-individual.jpg)
Automation examples of the JetMaster – Heat exchanger cleaning
Examples of JetMaster automation – Cleaning heavily soiled finned tubes
Example of the JetMaster – heat exchanger cleaning
![Jetmaster-youtube](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Jetmaster-youtube.jpg)
Application examples
![Energieerzeugung-g1](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-g1.jpg)
Cleaning a membrane wall in a waste incineration plant
![Energieerzeugung-g2](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-g2.jpg)
TubeMaster – Stainless steel shell and tube heat exchanger before and after cleaning by TubeMaster
![Chemieindustrie-g7](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Chemieindustrie-g7.jpg)
Cleaned tube bundle heat exchanger with the TubeMaster from mycon
![Energieerzeugung-g3](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-g3.jpg)
Exterior view of a dirty steam boiler
![Energieerzeugung-g4](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-g4.jpg)
Shell and tube heat exchanger consisting of corrugated tubes
![Energieerzeugung-g5](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/Energieerzeugung-g5.jpg)
Interior view of the tube bundle heat exchanger after cleaning
![Comparison Image 1](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g8.jpg)
![Comparison Image 2](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g7.jpg)
LuVo before and after cleaning with the JetMaster combination system
![abfallverbrennungsanlagen-g9](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g9.jpg)
Close-up of the LuVo after cleaning with the JetMaster combination system
Cleaning cooling towers
The pipes in the cooling tower were occasionally fed with calcareous water. As a result, an armor of hard limestone had developed around the pipes.The JetMaster combination system successfully cleaned the outer surfaces of the pipes. Zinc coating – which was destroyed here by previous chemical cleaning – is not attacked by JetMaster.
![abfallverbrennungsanlagen-g10](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g10.jpg)
Exterior view of a cooling tower with removed limescale deposits
![abfallverbrennungsanlagen-g11](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g11.jpg)
Limescale removed during cooling tower cleaning with the JetMaster combination system
![abfallverbrennungsanlagen-g12](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/abfallverbrennungsanlagen-g12.jpg)
Cooling tower pipes after cleaning
![JetPower](https://industriereinigung.kipp-umwelttechnik.de/wp-content/uploads/2024/03/JetPower.jpg)
The entire JetMaster combination system (incl. JetPower) is used to clean surfaces with limescale residues. You can find more information about the JetMaster combination system on our JetMaster product page.